Capture Readings on the
Walk, Not on Paper
Technicians log meters from their phone during rounds, timestamped and attributed, with offline capture where there is no signal.
Stop relying on manual tracking,start monitoring equipment usage accurately
Track meters and readings that match how your equipment is actually used — captured on the walk, checked against your thresholds, and flagged the moment they drift.
Lift reading capture rate
54.1% → 96.8%
Rounds are logged on the phone as they are walked, so readings stop going missing.
Cut time to spot a drift
3.5 days → 2 mins
A reading that crosses its threshold raises an alert the moment it lands, not at month end.
Reduce usage-driven failures
38% → 9%
Service follows real hours and cycles instead of a calendar that ignores how hard the asset ran.
Measure, capture & act onevery reading that matters
Track what actually mattersby creating custom metrics
Stop forcing assets into generic categories. Track what actually matters — whether it is hours, cycles, or custom operational data.
Book demo- Track cumulative meters or point-in-time readings.
- Attach multiple meters to a single asset.
- Define custom units for anything you measure.
Stop chasing readings on paper,capture them on the walk.
Technicians log readings on their phone during rounds, with offline support for areas without signal.
Book demo- Log readings on mobile, on the spot, during rounds.
- Group meters into routes for efficient walkarounds.
- Capture requests offline.
Get automated alerts the exactmoment readings differ
Ditch the delayed reports. Our system tells you the moment a reading goes out of bounds.
Book demo- Set min/max thresholds on any meter.
- Get instant alerts when a reading crosses the line.
- Auto-flag the asset for inspection when triggered.
Get automated alerts the exactmoment readings differ
Ditch the delayed reports. Our system tells you the moment a reading goes out of bounds.
Book demo- Set min/max thresholds on any meter.
- Get instant alerts when a reading crosses the line.
- Auto-flag the asset for inspection when triggered.
What maintenance teams sayabout Opmaint
“We were running PMs off a whiteboard and a shared spreadsheet. Six weeks in, every asset on the floor has a schedule and nothing has been missed.”
“Unplanned downtime on our press line dropped by about a third in the first quarter. The trend data made the replacement case for us.”
“My technicians actually use it. They scan the QR on the machine, the history and the manual are right there, and the work order closes on the phone.”
“The migration off MaintainX took two days and cost us nothing. That alone was the reason we could move mid-year instead of waiting.”
“I can finally answer what a machine has cost us over seven years without three people digging through folders for an afternoon.”
“Spare parts used to be the bottleneck on every repair. Now the purchase order raises itself when stock hits the minimum.”
“Audit week used to be a fortnight of preparation. Last time we exported the maintenance record for every asset in about ten minutes.”
“Four sites, one view. I can see which plant is behind on its PMs on a Monday morning without ringing round for a status.”
Insert Videohere
See how a meter goes from a walkaround reading to a threshold alert — in under two minutes.
Capture Readings on the
Track Any Metric with
Custom Meters
Runtime, cycles, downtime or a unit only your plant uses — define it once and attach as many meters as an asset needs.
Catch Drifts the Moment
a Reading Lands
Set min and max thresholds on any meter, get an instant alert when one is crossed, and auto-flag the asset for inspection.
Readings your team trusts,thresholds that act on them
Catch Problems Early via
Threshold Alerts
Set safe operating ranges for any meter and get notified the instant a reading crosses the line — before it becomes a failure.
Skip the Paper Rounds with
Mobile Capture
Technicians log readings on their phone during rounds, organised by route, with offline support built in.
Spot Trends Before They Break
using Reading History
Every reading is logged and charted over time, so slow drift — rising temperature, climbing vibration — shows up before it costs you downtime.
There’s us. Then there’s others.
| Feature | Opmaint | Legacy software |
|---|---|---|
| Pricing | $399 one-time | $75–120 / month |
| Unlimited Asset Hierarchies | ||
| Unlimited Custom Asset Fields | ||
| Asset QR Codes | ||
| Asset Warranty Tracking | ||
| Downtime Reporting (MTBF, MTTR) | ||
| Asset Snap | ||
| Bill of Materials | ||
| Anomaly Detection | ||
| Asset Check In / Check Out | ||
| Capital Depreciation Tracking | ||
| Asset Geolocation | ||
| Asset Templates |
Comparison figures are illustrative. Legacy pricing varies by vendor and seat count.
Cut your $tack.Do it all in Opmaint.
Save time and money with the easiest, most complete all-in-one maintenance platform.
Straight uptransparency
Per site.
Not per seat.
Ever!
Transform data into actionable insights that drive decisions, optimize operations, and deliver measurable business impact.
See our pricing